
Reference: BT-PY-CBKUS
Brand: PYLONTECH
Reference: BT-PY-CBKUS
Brand: PYLONTECH
Reference: SDM630MV2
Brand: EASTRON
Reference: ESCTT241005
Brand: EASTRON
Reference: SDM630MCT-MV
Brand: EASTRON
Reference: AM80K8K-48EU
Brand: SOLARPOWER24
Reference: SP-AC-PKOFFEU
Brand: SOLARPOWER24
Reference: HYVII5K5K-48EU
Brand: SOLARPOWER24
Reference: CBBMS
Brand: SOLARPOWER24
Reference: OFVM35K5K-48EU
Brand: SOLARPOWER24
Reference: IN-SP-WIFIPLU
Brand: SOLARPOWER24
Reference: SP-AC-MDEMTEU
Brand: SOLARPOWER24
Reference: AMII10K10K-48EU
Brand: SOLARPOWER24
Voltronic Axpert WP TWIN 8000-48 Inverter 8.0kw 48 volt IP65 Solar Inverter Photovoltaic Island
Photovoltaic inverter for off-grid hybrid island systems
Pure sine wave inverter
IP65 case
Touch button with 5” color LCD.
Built-in Wi-Fi for mobile monitoring (APP required)
It supports USB On-the-Go function
Communication ports reserved for BMS (RS485)
Configurable input voltage ranges for home appliances and personal computers via LCD control panel
Configurable output usage priority and timer
Charger source priority configurable via LCD control panel
Configurable battery charge current based on applications via LCD control panel
Compatible with mains or generator power
Table 1 Line mode specifications
MODEL |
8KW |
Waveform of the input voltage |
Sine (utility or generator) |
Rated input voltage |
230Vac |
Low loss Voltage |
170Vac ± 7V ( UPS ) 90Vac± 7V ( Appliances ) |
Low loss Return voltage |
180Vac ± 7V ( UPS ) ; 100Vac ± 7V ( Appliances ) |
High loss Voltage |
280Vac ± 7V |
High loss Return voltage |
270Vac ± 7V |
Maximum AC input voltage |
300Vac |
Maximum AC input current |
60A |
Maximum 2nd output current |
40A |
Rated input frequency |
50Hz / 60Hz (auto detect) |
Low loss rate |
40±1Hz |
Low loss Return frequency |
42±1Hz |
High loss rate |
65±1Hz |
High loss Return frequency |
63±1Hz |
Output short circuit protection |
Line mode: automatic switch Battery mode: electronic circuits |
Efficiency (line mode) |
>95% (nominal R load, fully charged battery) |
Transfer time |
10ms typical (UPS); 20ms typical (household appliances) |
Output power derating: When the AC input voltage is lower than 170V for the 8kW model, the output power will be reduced. |
Table 2 Inverter mode specifications
MODEL |
8KW |
Rated output power |
8000W |
Waveform of the output voltage |
Pure sine wave |
Output voltage regulation |
230Vac ± 5 % |
Output frequency |
60Hz or 50Hz |
Maximum efficiency |
93% |
Overload protection _ |
100ms@≥205% load ; 5s@≥150% load ; 10s@110%~150% load |
Peak capacity |
Nominal power 2* for 5 seconds |
Warning DC low voltage |
|
@ load < 20% |
46.0 Vdc |
@ 20% ≤ load < 50% |
42.8 Vdc |
@ load ≥ 50% |
40.4 Vdc |
Low DC Warning Return Voltage |
|
@ load < 20% |
48.0 Vdc |
@ 20% ≤ load < 50% |
44.8 Vdc |
@ load ≥ 50% |
42.4 Vdc |
Low DC cut-off voltage |
|
@ load < 20% |
44.0 Vdc |
@ 20% ≤ load < 50% |
40.8 Vdc |
@ load ≥ 50% |
38.4 Vdc |
High RE Recovery voltage |
64Vdc |
High DC cutoff voltage |
6 6 Vdc |
DC voltage accuracy |
+/-0.3V@ without load |
THD extension |
<5% for linear load, <10% for non-linear load at rated voltage |
DC Offset |
≦ 100mV |
No load energy consumption |
<85W |
Power limitation When the battery voltage is lower than 50Vdc, the output power will be reduced. If the connected load is greater than this reduced power, the AC output voltage will decrease until the output power reduces to this reduced power. The minimum AC output voltage is the output voltage setting – 1 0V. |
Table 3 Charging mode specifications
Utility charging mode |
|||
MODEL |
8KW |
||
Charging current (UPS) @ Rated input voltage |
12 0A (@V I/P =230Vac) |
||
Bulk charge voltage |
Battery flooded |
58.4 Vdc |
|
AGM/Gel battery |
56.4 Vdc |
||
Fluctuating charge voltage |
54Vdc |
||
Overload protection |
66Vdc |
||
Charging algorithm |
3 -Step |
||
charge curve |
|||
Solar entrance |
|||
MODEL |
8KW |
||
Nominal power |
8000W _ |
||
Maximum. Open circuit voltage of the photovoltaic field |
500Vdc |
||
PV array MPPT voltage range |
90Vdc~450Vdc |
||
Maximum. Input current |
18Ax2 |
||
Starting voltage |
80V +/- 5Vdc |
||
Power limitation |
Table 4 General specifications
MODEL |
8KW |
Security compliance |
THERE IS |
Operating temperature range |
from -10°C to 50°C |
Storage temperature |
-15°C~60°C |
H humidity |
Relative humidity 5% to95% (non-condensing) |
Dimensions ( D * W * H) , mm |
665 x 435 x 210 |
Net weight, kg |
32
|
T able 5 Parallel specifications
Maximum number of parallels |
6 |
No-load circulation current |
Maximum 2A |
Power unbalance ratio |
<5% at 100% load |
Parallel communication |
CANDIES |
Transfer time in parallel mode |
Maximum 50ms |
Parallel kit |
YES |
Note: Parallel function will be disabled when only PV energy is available.
Data sheet
Reference: AM80K8K-48EU
Brand: SOLARPOWER24
Reference: AMKS4TW6K6K-48EU
Brand: SOLARPOWER24
Reference: AM36K4K-24EU
Brand: SOLARPOWER24
Reference: KITZCO2EU
Brand: ZeroCo2
Reference: AM36K4K-24EU
Brand: SOLARPOWER24
Reference: SP-AC-MDEMTEU
Brand: SOLARPOWER24
Reference: AVM4T6K6K-48EU
Brand: SOLARPOWER24
Reference: VL-AM80K8K-48EU
Brand: VOLTRONIC
Reference: VL-AMT11K11K-48EU
Brand: VOLTRONIC
Reference: SNA6000EU
Brand: LuxPower
Reference: AVM2P5K5K-48EU
Brand: SOLARPOWER24
Reference: HYV4T6K6K-48DE
Brand: SOLARPOWER24
Reference: AVM3T6K6K-48EU
Brand: SOLARPOWER24
Reference: VL-AVM3T6K6K-48EU
Brand: SOLARPOWER24
Reference: HYT15K225K-48EU
Brand: SOLARPOWER24
Reference: KITVMIII2HI
Brand: SOLARPOWER24
check_circle
check_circle