- New
Reference: BT-PY-CBKUS
Brand: PYLONTECH
Reference: BT-PY-CBKUS
Brand: PYLONTECH
Reference: SDM630MV2
Brand: EASTRON
Reference: ESCTT241005
Brand: EASTRON
Reference: SDM630MCT-MV
Brand: EASTRON
Reference: AM80K8K-48EU
Brand: SOLARPOWER24
Reference: SP-AC-PKOFFEU
Brand: SOLARPOWER24
Reference: HYVII5K5K-48EU
Brand: SOLARPOWER24
Reference: CBBMS
Brand: SOLARPOWER24
Reference: OFVM35K5K-48EU
Brand: SOLARPOWER24
Reference: IN-SP-WIFIPLU
Brand: SOLARPOWER24
Reference: SP-AC-MDEMTEU
Brand: SOLARPOWER24
Reference: AMII10K10K-48EU
Brand: SOLARPOWER24
Specifications Inverter • Current Power 6kw • TWIN: • Restorable battery power supply • Restorable battery power • Restorable battery power • Removable LCD control module with multiple communications • Built-in Wi-Fi for mobile monitoring (available Android/Iphone app) • Supports USB On-the-Go function • Reserved communication port for BMS (RS485) support x Pylontech US2000/3000, Yilink PV/100/150A
Table 1 Specifications Line Mode
MODE INVERTER |
4KW |
6KW |
Waveform input voltage |
Sinusoidale (AC network or generator) |
|
Rated input voltage |
230Vac |
|
Low Voltage Loss |
170Vac±7V (UPS); 90Vac±7V (packing) |
|
Fall Low Return Voltage |
180Vac±7V (UPS); 100Vac±7V (Apparecchiature) |
|
High Voltage Fall |
280V |
|
Fall Elevate Return Voltage |
270Vac±7V |
|
Tension Max. aC input |
300Vac |
|
Rated incoming |
50Hz / 60Hz (Relevance) |
|
Fall Low Frequency |
40±1 Hz |
|
Fall Low Return Voltage |
42±1 Hz |
|
Fall High Frequency |
65±1 Hz |
|
Fall Elevate Return Voltage |
63±1 Hz |
|
Protection against short circuit |
Differential switch |
|
Efficiency (Line Mode) |
>95% (Nominal load R, fully charged battery) |
|
Duration of transfer |
10ms typical (UPS); 20ms typical (appearing); |
|
Output power reduction If the AC input voltage drops to 170 V, the output power will be reduced. |
Table 2 Specifications Inverter Mode
MODE INVERTER |
4KW |
6KW |
Nominal output power |
4KVA/4KW |
6KVA/6KW |
Output voltage waveform |
Pure sinusoidal wave |
|
Output voltage adjustment |
230Vac±10% |
|
Output frequency |
50 Hz |
|
Peak efficiency |
93% |
|
Overload protection |
5s@≥110% load; 10s@105%~110% load |
|
Overload capacity |
2* Rated power for 5 seconds |
|
Max. Output AC current |
30Amp |
40Amp |
Rated DC input voltage |
24Vd |
48Vdc |
Cold Start Voltage |
23.0Vdc |
46.0Vdc |
Low DC Alarm Voltage |
23.0Vdc 22.0Vdc |
46.0Vdc 44.0Vdc |
@ load |
||
@ load ≥ 50% |
||
DC Low Alarm Back Voltage |
23.5Vdc 23.0Vdc |
47.0Vdc 46.0Vdc |
@ load |
||
@ load ≥ 50% |
||
DC Low Cutoff Voltage |
21.5Vdc 21.0Vdc |
43.0Vdc 42.0Vdc |
@ load |
||
@ load ≥ 50% |
||
DC High Recovery Voltage |
32Vdc |
62Vd |
High DC cutoff voltage |
33 |
63Vd |
Consumption in load absence |
|
|
Table 3 Charging Mode Specifications
AC Mains Charging Mode |
|||
MODE INVERTER |
4KW |
6KW |
|
Charging algorithm |
3-Step |
||
AC charge current (max.) |
100Amp (TRANSLATED)I/P=230Vac) |
||
Bulk charge voltage |
Battery Lead-Acido |
29.2Vdc |
58,4 |
AGM/Gel battery |
28.2Vdc |
56,4 |
|
Float Voltage |
27Vdc |
54Vdc |
|
Charging curve |
|||
Mode Charging Solar MPPT |
|||
MODE INVERTER |
4KW |
6KW |
|
Max. Power array FV |
5000W |
6000W |
|
Max. FV current |
27A |
||
Nominal PV voltage |
320Vd |
360Vdc |
|
Start voltage |
60Vdc +/- 10Vdc |
||
Range voltage MPPT array FV |
60Vdc~450Vdc |
||
Max. Open circuit voltage FV array |
500Vd |
||
Maximum charge current (More Solar Charger AC Charger) |
120Amp |
Table 4 General specifications
MODE INVERTER |
4KW |
6KW |
Range operating temperature |
- 10 °C + 50 °C |
|
Storage temperature |
-15°C~60°C |
|
Relative humidity |
5 - 95% relative humidity (without condensation) |
|
Dimensions (P*L*H), mm |
115 x 300 x 435 |
|
Net weight, kg |
9 |
10 |
LIO II-4810 LIFEPO4 BATTERIA 5,12KW 48V |
||
BATTERY MODULE |
II-4810 |
|
CAPACITY |
5120Wh |
|
PARAMETER |
||
Norminal Voltage |
51.2VDC |
|
Full Charge Voltage(FC) |
56V |
|
Full Discharge Voltage(FD) |
42V |
|
Typical Capacity |
100 Ah |
|
Max Continuous Discharging Current |
150A |
|
Max Discharging Current |
192A at 1min |
|
Protect |
BMS, breaker |
|
Charge Voltage |
56V |
|
Charge Current |
20A (0.2C) |
|
Maximum Charge current |
50A (0.5C) |
|
Standard Charge method |
0.2C CC (Constant current) charge to FC, CV (Contstant voltage FC) charge till charge current decline to |
|
Inner Resistance |
≤20m ohm |
|
PHYSICAL |
||
Dimension, D X W X H (mm) |
214 x 621 x 550 |
|
Net Weight (kgs) |
55 |
|
*These figures may vary depending on different AC voltage and contry regulation. |
||
Product specifications are subject to change without further notice |
Please note the sale price of these products is with 10% VAT in case of purchase you will have to fill out a statement that the products will be used for a renewable energy plant The product is sold with reduced VAT to 10% exclusively to Italian residents with Italian shipping. In case of foreign customers please visit the section of the Inverter for EU countries website THE MODULE CAN BE FOUND HERE https://www.cercastock.it/repository/_barba_srl_dich_10.pdf THE PRODUCT WILL NOT BE DISPATCHED UNTIL YOU HAVE RECEIVED
Reference: SNA6000+2HI5KW
Brand: LuxPower
Reference: KITVMIII2HI
Brand: SOLARPOWER24
Reference: CV2MT
Brand: SOLARPOWER24
check_circle
check_circle